
Table of Content
- ASTM A240 grade 316 sheet specification
- ASME SA240 grade 316 sheet make
- Types of SA240 grade 316 plate
- ASME SA240 type 316 perforated plate thickness chart
- ASME SA240 grade plate guage chart
- ASTM A240 type 316 rolling plate chemical composition
- A240 gr 316 chequered plate mechanical composition
- ASTM A240 gr 316 flat sheet equivalent material
What is ASTM A240 grade 316 sheet?
This sheet uses a corrosion-resistant grade of stainless steel comprising chromium, nickel, and also molybdenum. An ASTM A240 Grade 316 sheet can operate under conditions exposed to salt water, chlorides, and sulfuric acid. SA 240 316 rolling sheets exhibit a tensile strength of 515 MPa and a yield strength of 205 MPa.
SA 240 316 plate and ASTM A240 gr 316 flat sheet supplier in India
What are the difference between ASTM A240 type 316 plate and sheet?
The primary difference lies in the thickness or the gauge of the product. An ASTM A240 gr 316 flat sheet has a measurement of less than ¼” or 6mm. Industries decide between the two depending on their weight requirements and service duration. An SA 240 316 plate is thicker than a sheet, usually over 6mm.

Leading manufacturer of ASTM A240 type 316 rolling plate in Mumbai. Buy SA240 gr 316 shim with MTC report

ASTM A240 gr 316 strip

ASTM A240 type 316 sheet

ASTM A240 SS 316 plate
What are the top 4 advantages of SA 240 type 316 hot rolled plate ?
These plates get manufactured at elevated temperatures, i.e., above the material’s recrystallization temperature. An ASME SA 240 316 hot rolled plate exhibits numerous bonuses, which we list below:
- It boasts workability, forming into client-specified sizes readily.
- It has fewer internal stressors.
- Good corrosion resistance in oxidizing and marine conditions.
- It is cheaper than cold rolling.
SA 240 type 316 hot rolled plate available in various finishes and cutting services as per your requirements at an affordable rate
ASTM A240 grade 316 sheet specification
| Grade | Other trade name & equivalent | Length |
|---|---|---|
| 300 Series, 316 |
| Cut to size |
| Surface finish | Tolerance of SA240 316 Sheet | Technique |
| ±1% | HR and CR |
| Standard | Sample | MTC |
| Provide free sample | According to EN 10204 3.1/3.2 |
| Origin | Tensile Strength | Delivery Time |
| Indian, Korean, USA, European | 515 MPa | 2-3 days |
| Available Width in stock | Available Thickness in stock | Brand Name |
| As per requirement | 1 milimeter – 80 milimeter | Imported, Jindal, Inox, POSCO |
| WNR no | Density | Temperature |
| 1.4401 / 1.4436 | 8 g/cm3 | 1400 °C |
| Edge | Properties | Packing |
| Slit and mill edge |
|
|
| Testing methods done | Shape | Application of A240 316 plate |
| Plate/sheet/coil |
|
ASME SA240 grade 316 sheet make
- INOX
- Bahrain
- Imported
- Jindal
- Sail
- Dixin
- POSCO
Wide stock of ASME SA 240 gr 316 cold rolled plate in various sizes, buy an A240 type 316 chequered plate at a low price
Types of SA240 grade 316 plate

ASME SA 240 316 hot rolled plate
- Thickness : 0.6 mm – 80 mm
- Used in railway and transport
- Used in petrochemical sector

SA 240 grade 316 plate
- Gas Cutting
- CNC plasma Cutting
- Shot Blasting

SA 240 type 316 shim stock
- IGC test
- Charpy impact test
- Hardness test
View ASME SA240 type 316 perforated plate thickness chart
ASME SA240 type 316 perforated plate thickness chart
| Thickness | Thickness | Available Sizes | Approx Weight per Sheet | Surface Area per Unit weight | ||
|---|---|---|---|---|---|---|
| milimeter | inches | lbs | kilogram | lbs/ft² | kilogram/meter² | |
| 0.381 | 0.015 | 36 * 96 | 15.12 | 6.84936 | 0.630 | 3.07566 |
| 0.381 | 0.015 | 36 * 120 | 18.90 | 8.5617 | 0.630 | 3.07566 |
| 0.45212 | 0.0178 | 36 * 96 | 18.15 | 8.22195 | 0.756 | 3.690792 |
| 0.45212 | 0.0178 | 36 * 120 | 22.68 | 10.27404 | 0.756 | 3.690792 |
| 0.45212 | 0.0178 | 48 * 96 | 24.19 | 10.95807 | 0.756 | 3.690792 |
| 0.45212 | 0.0178 | 48 * 120 | 30.24 | 13.69872 | 0.756 | 3.690792 |
| 0.5969 | 0.0235 | 30 * 96 | 20.16 | 9.13248 | 1.008 | 4.921056 |
| 0.5969 | 0.0235 | 30 * 120 | 25.20 | 11.4156 | 1.008 | 4.921056 |
| 0.5969 | 0.0235 | 36 * 96 | 24.19 | 10.95807 | 1.008 | 4.921056 |
| 0.5969 | 0.0235 | 36 * 120 | 30.24 | 13.69872 | 1.008 | 4.921056 |
| 0.5969 | 0.0235 | 36 * 144 | 36.29 | 16.43937 | 1.008 | 4.921056 |
| 0.5969 | 0.0235 | 48 * 96 | 32.26 | 14.61378 | 1.008 | 4.921056 |
| 0.5969 | 0.0235 | 48 * 120 | 40.32 | 18.26496 | 1.008 | 4.921056 |
| 0.5969 | 0.0235 | 48 * 144 | 48.39 | 21.92067 | 1.008 | 4.921056 |
| 0.73914 | 0.0291 | 30 * 96 | 25.20 | 11.4156 | 1.260 | 6.15132 |
| 0.73914 | 0.0291 | 30 * 120 | 31.50 | 14.2695 | 1.260 | 6.15132 |
| 0.73914 | 0.0291 | 36 * 96 | 30.24 | 13.69872 | 1.260 | 6.15132 |
| 0.73914 | 0.0291 | 36 * 120 | 37.80 | 17.1234 | 1.260 | 6.15132 |
| 0.73914 | 0.0291 | 36 * 144 | 45.37 | 20.55261 | 1.260 | 6.15132 |
| 0.73914 | 0.0291 | 48 * 96 | 40.32 | 18.26496 | 1.260 | 6.15132 |
| 0.73914 | 0.0291 | 48 * 120 | 50.41 | 22.83573 | 1.260 | 6.15132 |
| 0.73914 | 0.0291 | 48 * 144 | 60.49 | 27.40197 | 1.260 | 6.15132 |
ASME SA240 grade plate guage chart
| METAL GAUGE | NOMINAL DECIMAL (INCHES) | (APPROXIMATE INCHES) |
|---|---|---|
| 7 | 0.0080 | 0.1793 |
| 8 | 0.0080 | 0.1644 |
| 9 | 0.0080 | 0.1495 |
| 10 | 0.0070 | 0.1345 |
| 11 | 0.0050 | 0.1196 |
| 12 | 0.0050 | 0.1046 |
| 13 | 0.0050 | 0.0897 |
| 14 | 0.0040 | 0.0747 |
| 15 | 0.0040 | 0.0673 |
| 16 | 0.0030 | 0.0598 |
| 17 | 0.0030 | 0.0538 |
| 18 | 0.0030 | 0.0478 |
| 19 | 0.0030 | 0.0418 |
| 20 | 0.0030 | 0.0359 |
| 21 | 0.0025 | 0.0329 |
| 22 | 0.0020 | 0.0299 |
| 23 | 0.0020 | 0.0269 |
| 24 | 0.0020 | 0.0239 |
| 25 | 0.0015 | 0.0209 |
| 26 | 0.0015 | 0.0179 |
| 28 | 0.0010 | 0.0149 |
ASTM A240 type 316 rolling plate chemical composition
| Grade | Mn | C | Mo | Si | Ni | S | P | Cr | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| A240 316 | min. max. | – 2.0 | – 0.08 | – | – 0.75 | 8.0 10.5 | – 0.030 | – 0.045 | 18.0 20.0 | – 0.10 |
A240 gr 316 chequered plate mechanical composition
| Grade | Tensile Strength | Yield Strength 0.2% Proof | Elongation | Hardness | |
|---|---|---|---|---|---|
| Rockwell B (HR B) | Brinell (HB) | ||||
| A240 316 | 515 min (MPa) | 205 min (MPa) | 40 min (% in 50mm) | 92 max | 201 max |
ASTM A240 gr 316 flat sheet equivalent material
| Grade | UNS | EN | WERKSTOFF | BS | AFNOR | JIS | GOST |
|---|---|---|---|---|---|---|---|
| A240 316 | S31600 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 | 1.4401 / 1.4436 | 316S31 / 316S33 | Z7CND17‐11‐02 | SUS 316 | – |
What are the surface finishes available for ASME SA 240 gr 316 hot rolled plate?
Customers can choose the surface finish of an ASTM A240 Gr 316 strip based on their budget and application needs. Manufacturers offer standard polishing, BA or bright annealed finish, and sandblasting. SA240 gr 316 shim can also undergo a mirror finish, embossing, or hairline finishing.
What are the features of ASME SA 240 gr 316 cold rolled plate?
These plates display high strength for critical applications. An SA 240 type 316 hot rolled plate has a smooth and shiny surface finish. Manufacturers can produce a ASME SA 240 gr 316 cold rolled plate with precision and superior mechanical properties.
What are the application of ASME SA240 type 316 perforated plate?
The temperature tolerance and corrosion resistance of these plates are exemplary. An ASTM A240 316 SS perforated plate has multiple perforations in different shapes hexagonal, rectangular, etc. This design improves its fitment to water filtration, automotive, and food processing uses.Other industrial applications of SA 240 Type 316 shim stock are:
- Pressure vessels and heat exchangers
- Petrochemicals
- Quarrying and mining
- Chemical processing
- Heavy machinery components
- Engines and motors
